Exposure assessment of microwave ovens and impact on total exposure in WLANs

In situ exposure of electric fields of 11 microwave ovens is assessed in an occupational environment and in an office. Measurements as a function of distance without load and with a load of 275 ml of tap water were performed at distances of 1 m, a model of the electric field in a realistic environment is proposed. In an office scenario, switching on a microwave oven increases the median field strength from 91 to 145 mV m(-1) (+91 %) in a traditional Wireless Local Area Network (WLAN) deployment and from 44 to 92 mV m(-1) (+109 %) in an exposure-optimised WLAN deployment

In-situ measurement methodology for the assessment of 5G NR massive MIMO base station exposure at sub-6 GHz frequencies

As the roll-out of the fifth generation (5G) of mobile telecommunications is well underway, standardized methods to assess the human exposure to radiofrequency electromagnetic fields from 5G base station radios are needed in addition to existing numerical models and preliminary measurement studies. Challenges following the introduction of 5G New Radio (NR) include the utilization of new spectrum bands and the widespread use of technological advances such as Massive MIMO (Multiple-Input Multiple-Output) and beamforming. We propose a comprehensive and ready-to-use exposure assessment methodology for use with common spectrum analyzer equipment to measure or calculate in-situ the time-averaged instantaneous exposure and the theoretical maximum exposure from 5G NR base stations. Besides providing the correct method and equipment settings to capture the instantaneous exposure, the procedure also comprises a number of steps that involve the identification of the Synchronization Signal Block, which is the only 5G NR component that is transmitted periodically and at constant power, the assessment of the power density carried by its resources, and the subsequent extrapolation to the theoretical maximum exposure level. The procedure was validated on site for a 5G NR base station operating at 3.5 GHz, but it should be generally applicable to any 5G NR signal, i.e., as is for any sub-6 GHz signal and after adjustment of the proposed measurement settings for signals in the millimeter-wave range

In situ exposure assessment of intermediate frequency fields of diverse devices

In this study, in situ exposure assessment of both electric and magnetic fields of different intermediate frequency (IF) sources is investigated. The authors investigated smart boards and touchscreens, energy-saving bulbs, fluorescent lamps, a portable hearing unit and an electrosurgical unit (ESU). For most of these sources, the electric field is the dominating quantity. International Commission on Non-Ionizing Radiation Protection reference levels are exceeded for touchscreens (44 kHz: up to 155.7 V m(-1) at 5 cm), energy-saving bulbs (38-52 kHz: up to 117.3 V m(-1)), fluorescent lamps (52 kHz: up to 471 V m(-1) at 5 cm) and ESUs (up to 920 kHz: 792 V m(-1) at 0.5 cm). Magnetic field strengths up to 1.8 and 10.5 A m(-1) were measured close to the ESU and portable hearing unit (69 V m(-1)), respectively. Large differences of measured field values exist among the various operating modes of the IF equipment. Compliance distances for general public range from 15.3 cm (touchscreen) to 25 cm (fluorescent lamps)

Characterization of the exposure due to smart-home devices and other residential RF sources

C

Emissions from smart meters and other residential radiofrequency sources

The advent of the Internet of things comes with a huge increase in wirelessly communicating devices in our environment. For example, smart energy-consumption meters are being widely deployed in residences from which they communicate their state using radiofrequency networks. Accurate characterization of the radiofrequency emissions from emerging residential wireless solutions is important to inform the public about the potential impact on their exposure to radiofrequency electromagnetic fields. A new measurement procedure to determine the exposure from residential radiofrequency devices is proposed by assessing the peak emitted fields at various distances and the proportion of time they transmit (duty cycle). Radiofrequency emissions from 55 residential devices were measured in 10 residences (Belgium and France) and compared to environmental levels, emissions from 41 mobile phones, and international standards. Overall, residential levels of radiofrequency electromagnetic field exposure are low. In addition to the continuous environmental exposure, wireless access points (due to frequent use) and especially mobile phones and other personal communication devices (due to their use close to the body) continue to represent the bulk of the radiofrequency electromagnetic field exposure in the smart home. However, some residential devices can significantly increase the exposure if their duty cycles are high enough (>10%), especially when held or used close to the body. Individual smart meters, on the other hand, will contribute only little in general, despite emissions of up to 20 V m(-1) at 50 cm, due to their low duty cycles (maximum 1%) and locations

Spatial and temporal assessment of radiofrequency electromagnetic fields emitted by smart meters and smart meter banks in urban environments

This paper describes radiofrequency (RF) electromagnetic field (EMF) measurements in the vicinity of single and banks of advanced metering infrastructure (AMI) smart meters. The measurements were performed in a meter testing and distribution facility as well as in-situ at five urban locations. The measurements consisted of gauging the RF environment at the place of assessment, evaluating the worst-case electric-field levels at various positions around the assessed AMI meter configuration (spatial assessment), which ranged from a single meter to a bank of 81 m, and calculating the duty cycle of the system, i.e. the fraction of time that the AMI meters were actually transmitting (12-h temporal assessment). Both in-situ and in the meter facility, the maximum field levels at 0.3 m from the meter configurations were 10-13 V/m for a single meter and 18-38 V/m for meter banks with 20-81 m. Furthermore, 6-min average duty cycles of 0.01% (1 m) up to 13% (81-m bank) were observed. Next, two general statistical models (one for a single meter and one for a meter bank) were constructed to predict the electric-field strength as a function of distance to any configuration of the assessed AMI meters. For all scenarios, the measured exposure levels (at a minimum distance of 0.3 m) were well below the maximum permissible exposure limits issued by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), the U.S. Federal Communications Commission (FCC), and the Institute of Electrical and Electronics Engineers (IEEE). Indeed, the worst-case time-average exposure level at a distance of 0.3 m from an AMI installation was 5.39% of the FCC/IEEE and 9.43% of the ICNIRP reference levels